OK, this one gonna be very useful for Epson Stylus Printer Users including me.
Do you ever get warning from Epson Status Agent about "Your printer are at the end of Service"? Or do you oftenly do "Clean Heads"? The Power Led and Red Led blinking?
It's not a big problems, mostly the printer is just have the "waste ink pad" full.
What is waste ink pad?
Waste ink pad is the place where ink that used for "clean head" are stored temporarily, and needs to cleaned/drained once it gets full. To clean/drain it, we need an expert or who understand about printer mechanism. When you call the expert, also tell him/her to make a pipe from the "waste ink pad" to a bottle at outside of the printer, so next time when the warning(waste ink counter gets maximum) come out again. We can solve it ourself with this freeware.
This is SSC Service Utility, it has ability to make a Factory Command for Epson Stylus Printers.. The warning I said is when "waste ink counter gets to maximum", waste ink counter cen be reset with this freeware. The Waste ink bottle that we put outside printer can be cleaned manually by hand. So we just need one time service from the expert for this warning. ^.^
How to reset the waste ink pad counter?
1. Go to www.SSCLG.com , download and install the freeware
2. Turn on your Epson Stylus Printer and start the freeware.
3. Click on "configuration" tab, select your installed printers and the models in the drop-down list.
4. Click on "Ink monitor" tab and click refresh, your ink level should be displayed.
5. Close the SSC Service Utility, and the icon should displayed in the taskbar.
6. Right-Click on the icon -> Protection Counter -> Reset Protection Counter
7. Then Right-click again on the icon -> Extra -> Soft Reset
8. Done ^,^
There are still many features in this freeware, you can try it by yourself later.
Warning!! making a pipe connected to the waste ink pad could lead to Losing Your Printer Warranty
Notes :
1.Use the cables you got when purchasing the printer. If it's Parallel Cable use it, dont use converter when using this freeware. Otherwise the freeware cannot communicate with the printer
2.You can also use this freeware as replacement of Epson Status Agent.
Hope it helps. ^.^
You're the
Visitors &
Page Views.
Visitors &
Page Views.
Wednesday, December 31, 2008
How to Service and Fully Control your Epson Stylus Printer?
How to add an Internal 3G HSDPA to ASUS Eee PC
I going to make some articles today, even it's rather short articles.
Do you planning to buy ASUS Eee PC?? So you are, Lucky. There is a blog that are making his ASUS Eee PC that has an Internal 3G HSDPA Modem.
The blog owner are providing many HardMod tutorial to your PC or notebooks.
Read the step by step tutorial to add the 3G HSDPA Modem to your ASUS Eee PC : http://jkkmobile.blogspot.com/2007/12/how-to-add-internal-3g-hsdpa-to-asus.html
Remember Hard Modding your Hardware equals to Losing your Hardware Warranty.
XIRKA - Wireless Chipset from Indonesia
Hello all,
it's today it's tonight, it's the last day in 2008. ^^
When browsing in the internet I found that Indonesia also produces wireless chipset which named XIRKA.They produce Wireless Chipset, like bluetooth, WiFi, etc. I don't find to much information in the websites.
Maybe they just produce the chipsets to be integrated in your wireless products..
Check The Website at : www.XIRKAChipset.com.
Thursday, December 25, 2008
At Last, Indonesian Language Supported | Baca dengan bahasa Indonesia^^
Hello all,
When I just starting to blog here, I thought a very long time about what language do I use. And I think international(English) would be good, although I thinked about Indonesian too, because there is no website translator for Indonesian language at that time. I also thought about make another blog with indonesian version or posting with dual language.
But now, we have Google Translator Beta, which support Indonesia Language. Now Indonesian readers can also read more easily.
Even it's beta, but I think the translation result is fairly understandable.
You can change the language by choosing it at the right side.
For Indonesia Language You can CLICK HERE.
Big Thx for Google, I make this as a X'Mas Gift for Indonesian People HO Ho hO ^^ Read More......
How to Automatically Delete Autorun Virus from Flashdrive & Immunize it??
Hello all, Today is Christmas, but I'm not going anywhere. So I'm going to give a tips here.
In Indonesia, where I used to live now. Most of virus come from Autorun Flashdrive / Flashdisk / Pendrive. And mostly spread from infected college computers.
I did tell you tips about : HOW TO prevent VIRUS to AUTORUN from flashdrive by Disabling Autoplay. But it's still autorun when we double-click the drive.
So we need a better trick to patch that weakness. We are going to need Ninja Pendisk Freeware. Which will AUTOMATICALLY delete Autorun Virus from Flashdrive/pendrive/Flashdisk."Ninja is the freeware zero-configuration program designed for guarding computers against viruses transmitted by USB pendisks.
Follow these steps:
To keep things simple, ninja is fully portable, self-contained and requires no installation.
Besides removing known virulent files, this tool will also immunize your pendisk and create a folder called autorun.inf with special protection permissions to protect your pendisk from being infected again when plugged on contaminated computers."
1.Go to NunoBrito.eu/ninja to Download Ninja Pendisk or click here to download!
2.Run it once downloaded, keep ur internet connection online.
Ninja will try to download configuration file which will automatically updated when connected to internet.
3.You will see a file named "ninja.txt" comes up, that's an update and setting of Ninja Pendisk. Change the setting if you want ^^.
4.Right-click on Ninja in taskbar, and activate disable autoplay.
5.Plug in your Flashdrive, a dialog pop-up displaying the processes of Virus Deletion and Immunize your Flash Drive.
FYI : It support XP & Vista; This tricks gonna prevent most common virus using autorun, but don't let your guard down in Internet and other things.
Read more about it from: NunoBrito.eu/Ninja
Hope it helps, Merry Christmas
Merry X'Mas 2008
Ing el L 2x
Ing el, all de way..
X'Mas has come~
within all of us~
in 2 thousand eight~eight..
Merry Christmas Everyone ^^
Wednesday, December 17, 2008
Blocking Apps with GPedit.msc
Hello all,
I juz passed my 1st semester tests, that's why I didn't blog anything back then. And also because of my ISP are still having problem with International connection, so I can't browse freeely.
Now, after a long time I want to tell you how to make "a list of allowed only programs" or "a list of disabled programs". It's useful if you don't user/s to access applications which aren't related to their works in office. ^^
Follow these steps:
1. Go to Start -> Run -> type "gpedit.msc" w/o quotes.
2. browse to "User Configuration" -> "Administrative Templates" -> "System"
3. Find and double clicks "Run Only allowed Windows Applications"(if you want to make a list of all apps that you allow to access)
or "Don't run specified Windows Applications" (if you want to make a list of apps that you don't allow to be accessed)
4. Choose "enable" option, and click on "Show..." option.
5. And add the application process names in the list. For example : winword.exe ; notepad.exe ; wmplayer.exe ; winamp.exe.
FYI: You can't disable process like Task Manager which started by "System" account. You can disable it with other policies.
You can also see the following pic:
Hope it help, Come Back soon.
Next time I will tell you a Trick to prevent virus from your flashdrive to autorun. ^^
Wednesday, November 26, 2008
How to Login as 'SYSTEM' in XP
Hello all,
Again Long Time No Post.. This time I wanna tells you How to login as 'SYSTEM' in Windows XP. This account type is the highest level/position in Win XP, higher than the admin. As I heard, all NTFS permission
Follow these instructions:
1. Open CMD (Start->Run->type'cmd')
2. type: "at 2:32PM /interactive cmd" w/o quotes
Replace 2:32PM with ur computer time & add 1min
3. Wait a minute, and new cmd windows pop up as you scheduled before. But it's not an usual cmd.
4. move to Windows directory in cmd, using "cd.." command w/o quotes.
5. Open Task Manager(ctrl+alt+del), go to processes
6. Select 'explorer.exe' and press 'end process' and 'yes'
7. Now back to the special CMD, type: "start explorer.exe" w/o quotes
8. Wait for a few minutes, and now your user level is 'SYSTEM'
Many Restrictions is gone in this mode. So Be Carefull, especially if you don't really understand what are you gonna do/set in this mode. Because computer will not restrict anything you do. Your setting in this mode can lead to computer malfunction, if you are not careful.
FYI: this mode only remain until you restart ur computer or logout that user. You need to follow the instruction above again to login as 'system' again. :D
And until I posted this tips, I still don't know what is the extra features when we are in 'system' mode. But ONE thing I know, 'SYSTEM' user is at the TOP rank of user account types.
THE VIDEO TUTORIAL :
1.Youtube-How to log in as 'System' user in Windows XP.
2.Metacafe-How To Login To The Hidden Windows XP 'SYSTEM' User-account.
Bye2
Subscribe to:
Posts (Atom)
